How to set semantic annotations in Visage and transfer them into PowerScribe

Transcript

• 00:00In this video I'm going to show you how
• 00:03to set semantic aortic annotations.
• 00:06So first of all you want to have an
• 00:09NPR viewer. So select the thin slices,
• 00:12go to the NPR viewer, actually example here.
• 00:17If you haven't selected thin slices,
• 00:19just drag them over here.
• 00:21And now we first got to adjust our
• 00:25first level designers of Salva.
• 00:29Bear with me, I'm using a Mac since we
• 00:32don't have a good screen recording on our.
• 00:34Workstations, so you go to the
• 00:38level of the science of a server.
• 00:41Adjusted into plans.
• 00:48You're going to either do the right click,
• 00:51set, create semantic annotations.
• 00:53What I showed in the prior video.
• 00:56Or you hit your shortcut.
• 00:57They're going to use the shortcut.
• 01:01And so you start measuring.
• 01:04First from the. Comercial,
• 01:08here to the opposite side.
• 01:11Hit Jaggan second centers of a server.
• 01:16Here to the opposite side.
• 01:23And so forth, so you don't
• 01:25have to do anything else.
• 01:26Once you're set, you just move on.
• 01:29For example, now we're going to
• 01:31go to the China Travel Junction.
• 01:35Can wanna make sure you're
• 01:37perpendicular in both planes.
• 01:41Then head head J again or
• 01:44whatever shortcut you selected.
• 01:45Go to center of a junction.
• 01:47For now, we're only going
• 01:49to have one measurement.
• 01:53Then move up. If you hit F 9.
• 01:58It will default to your initial layout,
• 02:00so the mid ascending, thrusting
• 02:02your damn most of the time, no?
• 02:06Much of adjustment is needed. Jam.
• 02:18Nan so on now we got to the
• 02:21next level, Lee. The store.
• 02:32A sending approximately
• 02:34to brachycephalic again.
• 02:42Now for the. For the arch,
• 02:46I'd like to start off fresh hit F 9 again.
• 02:50Get your Excel image.
• 02:54Adjust it here on the Accel to the arch.
• 03:00Like that it will be laid out.
• 03:09And then you want to go.
• 03:23And once you're satisfied with
• 03:27your adjustment. Of approximately
• 03:29their left subclavian artery, here.
• 03:34See if you have to do be
• 03:37perpendicular there and then.
• 03:47You gonna measure again here.
• 03:51Top of the arc approximal.
• 03:53Turn left of Klivian.
• 03:55If there is another static plug you
• 03:58you want to have the auto wall of the
• 04:02aorta always include the thrombus.
• 04:04So if there would be a thrombus here,
• 04:06you would go to the outer
• 04:08ball no matter what.
• 04:11And then they move on to the.
• 04:20Proximal descending.
• 04:26How was it Jay?
• 04:31And you don't need to take a screenshot now.
• 04:36'cause the attending can do that at the end.
• 04:38Now for the. Mid descending.
• 04:48So go to the level of the palmiotto here.
• 04:51Or if there's a larger segment,
• 04:53you go to the larger segment.
• 04:57Lego is adjusted.
• 05:00To be perpendicular to the wall.
• 05:05Hitch again.
• 05:15Now the diaphragm I hit F 9 go
• 05:17to the level of the diaphragm.
• 05:20So here you want to angle later a little bit.
• 05:33It J again in order to add the diaphragm.
• 05:40Then the last two last
• 05:43measurements will be super renal.
• 05:58And the last one is infernal.
• 06:06So normally we do a standard measurement,
• 06:08but if there would be.
• 06:11Areas where there is a focal aneurysm,
• 06:14you can additionally measure that as well.
• 06:17Besides the standard areas.
• 06:20So this is the last one in for renal.
• 06:23So you don't need to take the screenshots.
• 06:28But obviously you can.
• 06:29After you're done,
• 06:30you can cycle through with.
• 06:35F-11 and F-12 and the attending
• 06:39then can take the screenshots.
• 06:43If they approve your measurements or
• 06:45otherwise they can adjust them. Very easily.
• 06:50And so the final step is that you.
• 06:55Use this set annotation and
• 06:57that will transfer all the
• 06:59measurements into powerscribe.
• 07:01If you use you have to use
• 07:03the system wide template.
• 07:05It is set up to work with them. And.
• 07:13And that is it. Thank you very much.
• 08:55Yes, Sir.